ETAPE 1 : Attach the 2 tinsels along with the white Japanese silk under the shank.

ETAPE 2 : Wrap the thread with adjacent winds as shown to form the underbody

ETAPE 3 : Wind the white Japanese silk between the 2 tinsels. The silk will push aside and lay between the 2 tinsels automatically

ETAPE 4 : Take 2 wings which you assembled.

ETAPE 5 : Place the lighter colored wing inside of the darker

ETAPE 6 : Position your wing to a length that looks good. It is your choice at this stage

ETAPE 7 : Place the 2 wings at the top of the shank of the hook.

ETAPE 8 : With the tying thread start to compress fibres by a first turn.

ETAPE 9 : Then with the 2nd turn you continue to compress the wing and so on

ETAPE 10 : Cut away all excess material

ETAPE 11 : Check  the good positioning of the wing.

ETAPE 12 : Check for proper positioning of the wing

ETAPE 13 : your wing is now in place.

ETAPE 14 :Cut away the waste, but not so shortly that your wing will be likely to slip and ruin your work

ETAPE 16 : Attach a black ostrich herl, then form the butt